• <input id="ccq0q"></input>
    <rt id="ccq0q"></rt>
    English 中文
    Your location：Preface Product center Chlorinated Polyethylene

    Chlorinated Polyethylene Resin

    As an excellent impact modifier, Keliren? chlorinated polyethylene thermoplastic resin is widely used in PVC extrusion and injection molding products, including profiles, pipes, sheets and fittings. The addition of a small amount of Keliren? resin can greatly enhance the impact resistance of rigid PVC and improve its processing fluidity. In addition, due to its good chemical resistance, outstanding low-temperature performance, high filling capacity, excellent weather resistance and remarkable compatibility, Keliren? resin is used in a wider range of formulation systems.

    Application fields

    • CPE is currently the most widely used and most economical impact modifier in the PVC profile industry.

    • Keliren? resin is able to improve the impact resistance and aging properties of PVC pipes significantly. CPE is especially widely used in large-diameter pressure-resistant liquid conveying pipes to improve its pressure bearing performance and extend its service life.

    • When Keliren? resin is blended with PVC to produce soft products, CPE acts as a permanent polymer plasticizer for PVC to avoid the migration of general plasticizers (such as DOP) .

    • Keliren? resin is also used as a modifier and compatibilizer in flame retardant ABS, SAN, HDPE and PP materials to improve their impact resistance and flame retardancy.

    • Keliren? resin is also used in the sole industry due to its good wear resistance and flex resistance.

    Modified chlorinated polyethylene (I) Technical indexes

    No.

    Item

    		UnitCPE132CCPE1135CCPE135CCPE235CTest method
    1Chlorine contentwt%32±135±135±135±1GB/T9872
    2Shore hardnessShore A≤60≤57≤57≤60GB/T531
    3Tensile strength MPa≥8.0≥8.5≥8.5≥8.5GB/528
    4Elongation at break%≥800≥800≥800≥800GB/528
    5Application-FR-ABS,Flexible PVC FR-ABS,Flexible PVC PE film   FR-ABS,Flexible PVC PE film  FR-ABS Impact modifier -
    6Performance-


    Low residual crystalline and good

    processing flowability

    Low residual crystalline and good 

    processing flowability

    Low residual crystalline and good 

    processing flowability

    Moderate residual crystalline, 

    can be stored in silo

    		-

    Modified chlorinated polyethylene (II) Technical indexes

    No.ItemUnit CPE142CCPE6325CPE3610CPE3605Test method
    1Chlorine contentwt%40±136±136±136±1GB/T9872
    2Shore hardnessShore A≤65≤60≤60≤60GB/T531
    3Tensile strength MPa≥8.0≥8.5≥8.5≥8.5GB/528
    4Elongation at break%-≥600≥600≥600GB/528
    5Application-

    FR-ABS, PE film 

    Impact modifier

    used in high-speed extrusion PVC products


    		Impact modifier, used in high-speed  extrusion PVC productsImpact modifier,used in PVC products-
    6Performance-Good processing flowability and outstanding flame resistance 

    Excellent processing flowability

    		Much outstanding processing flowability

    Good processing flowability and Good impact modification performance

    		-
    Return

    Customer message

    亚洲一级中文理论片_亚洲欧洲中文字幕免费看_在线无码免费一区_久久久一夲精品99久久精品66